| Customization: | Available |
|---|---|
| Density: | High Density |
| Flammability: | Flame Retardant |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PRODUCT FEATURES
Excellent adhesion to a wide variety of surfaces such as UPVC, masonry, brick, block work, glass, steel, aluminum, timber and other substrates (except PP, PE and Teflon);
High thermal and acoustical insulation;
Very good filling capacities;
Does Not slump at low temperature;
Application temperature between -18ºC to +35ºC;
Optimal application temperature between +18ºC to +25ºC;
It contains CFC-free propellants which are harmless to the ozone layer.
STOREAGE & SHLF LIFE
12 months in unopened packing store in temperature between +5°c to +25°c. Keep in cool, shade and well ventilated area. Always keep the can with the valve pointed upwards
APPLICATIONS:
1. Shake the aerosol can for at least 40seconds.
2. Clean and moisten surfaces with a water sprayer prior to application.
3. Fit the gun or straw on the adaptor. Firmly screw the can on the adapter and turn the flow adjustment screw.
4. Fill the holes and cavities approximately 50% as the foam will expand. Bottom up during application.
5. Foam will be tack-free in about 10 minutes.
6. Excess can be trimmed in about 20 minutes.
SAFETY RECOMMENDATION:
1. Do not breathe spray/vapor; In case of eye contact, flush with water and get immediate medical attention;
2. Use in well-ventilated areas;
3. Wear suitable protective clothing, gloves and goggles;
4. Keep away from direct sunlight and do not expose temperatures over 50°c;
5. Do not burn or pierce even after use;
6. Keep away from heat, sparks, flames and static electricity;
7. Turn off sources of ignition (pilot light etc.); Keep out of the reach of children.
| Base | Polyurethane |
| Consistency | Stable Foam |
| Curing System | Moisture-cure |
| Tack-Free Time | 8-10mins |
| Drying Time | 20-25mins |
| Cutting Time | Less than 1 hour |
| Yield | 60-70L |
| Specific Gravity | 18-20 kg/m³ |
| Temperature Resistance | -40ºC to +100ºC |
| Application Temperature Range | -18ºC to +35ºC |
| Optimal Application Temperature | +18ºC to +25ºC |
| Colour | Champagne |
| Insulation Factor (Mw/m·k) | ≤ 0.04 |
| Compressive Strength (kPa) | ≥ 50 kPa |
| Tensile Strength (kPa) | 8N/cm² |
| Shear Strength (kPa) | ≥ 180 kPa |
| Dimensional Stability | ≤ 5% |
| Foaming ratio | ≥60 |
){kind=link}